Initium 400 / 600 L

The field sprayer INITIUM is ideal for medium and large agricultural plots. It is specially conceived and designed for watering low agricultural crops such as strawberries, potatoes, asparagus, parsley, tomatoes and other vegetable varieties. It is designed for planting in 5 rows of low agricultural crops. The chassis is painted and made of metal pipes. The tank consists of three parts: the main tank, the hand washing tank and the system flushing tank. The POSEIDON device is mounted on a sliding rail 1m high, which enables easier height regulation. The closing system is at a 90 degree angle. The pipes of the nozzle holders are made of high-durability resin, and the nozzle holders contain one nozzle and an anti-drip system. The filter has the possibility of self-filling from natural sources (wells, reservoirs for water accumulation, springs, etc.). The preparation is homogenized with a hydromixer. The lower suspension is achieved in three points using a sleeve Ø22/28 mm. There is also the possibility of installing chrome pipes, command groups with multiple outputs, copying devices and other equipment, which is specified in the additional equipment.

INITIUM_00

STANDARD FEATURES

Three tanks: polyethylene with sieve and cover 400/600 L, tank for washing hands 15L with faucet, tank for washing the system 40/60L;

Total emptying system;

Solid metal construction;

Varnished steel frame;

Lower suspension using a sleeve Ø22/28 mm;

Mechanical pressure regulator "BASIC 206" with 4 or 5 outputs;

COMET pump (flow 65 L/min, maximum pressure 20 bar)

Filter (50mesh=300µm) GEOLINE with self-filling possibility;

Hydro mixer with nozzle Ø1.5mm;

Plastic resin nozzles GEOLINE type AZ 0.2 for working pressure 3 - 4 bar, angle resin 110°;

OPTIONAL FEATURES

Liquid filling kit with joint Φ 30mm (5 m hose + filter D.40);

Cardan L=800mm Φ 22x54mm, with PVC plastic protection;

Surcharge for powder mixer on filter tank;

Hydraulic injector (mixer + injector);

Tank rinsing - a shower;

Surcharge for 4 ways mechanical pressure regulator "Basic 206" with the possibility of setting pressure in every sectin individually;

Surcharge for 5 ways mechanical pressure regulator "Basic 206" with the possibility of setting pressure in every sectin individually;

Surgacharge for electronic pressure regulator with 4 ways (electronic opening of seat valves, electronic pressure setting and electronic opening of the central valve) with battery controller 12V;

Surcharge for electronic pressure regulator with 5 ways (electronic opening of seat valves, electronic pressure setting and electronic opening of the central valve) with battery controller 12V;

Red warning kit;

Manometer Φ 100mm;

Three-pronged support - triplex with fan nozzles for device 12m, 14m and 15m, recommended pressure from 2 to 4 bar, with spray angle 110º;

Wind nozzle up to 20 km/h, recommended pressure from 2 to 7.5 bar, with a spray angle of 110º;

Reinforced high-pressure hose, up to 20 bar, length according to the customer's request from 1 to 100m;