Sakan 200-300L

Mounted atomizers are ideal for small and medium-sized plantations of fruits and vines. The deflector directs the air currents so that the jet, carried by the air stream, covers only the treated area.

The tank is polyethylene and consists of two parts, the main one with a filter and a cover and a hand-washing tank with a faucet. The fan is Ø700 mm (7 feathers with the possibility of regulation). Stainless steel tube nozzles holder. Double adjustable brass nozzle with anti-drip and ceramic nozzles. The fan is started by a two-speed multiplier, with declutch lever. The filter has the possibility of self-filling from natural sources (wells, reservoirs for water accumulation, sources, etc.). The homogenization of the preparation is accomplished by a hydro-injector. The bottom hinge is realized in three points with a Ø22 / 28 mm sleeve. There is also the possibility of installing fins, extended hoses to the tractor cabin, electronic pressure regulator and other equipment, as stated in the accessories.



Two tanks: polyethylene with filter and cover 200/300L and hand-washing tank 15L with faucet;

Total emptying system;

Chassis (metal construction) - painted (car paint);

Three ways pressure regulator;

Pump: 3 piston model, flow rate 50 L/min, maximum pressure 40 bar;

Diffuser assembly metallic - painted (car paint);

Stainless steel tube nozzles holder;

12 brass double-pole sprinklers with anti-drip system and ceramic tiles Ø18mm with openings 0.8 and 1.2mm;

Transmission of torque using a MA502/14 multiplier with a transmission ratio of 1:4.53 and 1:3.82, with two speeds;

Fan ø 700 mm aluminum hub and 8 blades made of polyamide reinforced with glass fibers, with the possibility of fin regulation at an angle of 20 to 45°;

Filter (50mesh=300µm) with the possibility of self-charging from natural sources (wells, water storage tanks, springs, etc.);

Hydro mixer with Ø1.25 mm nozzle;


Top directional fins for diffusor D.700mm;

Extended hoses to the tractor cabin;

Electronic pressure regulator;

2 long-range end nozzles-top nozzles;

Cardan L=800mm Φ 22x54mm, with PVC plastic protection;

Self-filling system (5m ribbed hose + suction basket);

Surcharge for powder mixer on filter tank;

Hydraulic injector (mixer + injector);

Tank rinsing - a shower;

Manometer Φ 100mm;

Red warning kit;

Leaves protection for 700 mm d. fan 980*225mm;

Rear bumper for diffusor D.700mm;