Mandano

Spraying group ideal for large-sized farms. The frame is varnished and made of made of bent profiles The wheels are the appropriate height and width, which prevents the cropping of agricultural crops . The tank consists of three tanks: polyethylene with filter and cover, hand-washing tank and rinsing tank. The boom "ITALA" is mounted on a 1m sliding rail that allows easier height adjustment. The closing system is foldable, built with steel tubes and high resistant plastic resin and the nozzle supporters contain one nozzle and anti-drip system. The filter has the possibility of self-filling from natural sources (wells, reservoirs for water accumulation, sources, etc.). The homogenization of the preparation is accomplished by a hydro-injector. There is also the possibility of installing prochromic tubes, triplex nozzles, command groups with multiple ways and copying device.

 

sprayers_mandano_01

STANDARD FEATURES

Three tanks: polyethylene with filter and cover 400/600L, hand-washing tank 15L with faucet, rinsing tank 40/60L;

Varnished steel frame;

Mechanical pressure regulator "Start 06" with 4 or 5 ways;

Pumpa Dal Degan DL 3105 NP (3 diaphragms, 105 L / min flow, maximum pressure 20 bar) or DL 4120 NP (4 diaphragms, flow 120 L / min, maximum pressure 20 bar) depending on the spray device;

Filter (50mesh=300µm) (Tecomec) with the possibility of self-charging from natural sources (wells, reservoirs for water accumulation, springs, etc.);

Hydro mixer GEOLINE with nozzle Ø1.5mm;

Plastic resin nozzles GEOLINE type AZ 0.2 for working pressure 3 - 4 bar, angle resin 110°;

Wheel BKT TR-135 9.5-24;

Ore fixed with swivel trailing eye;

OPTIONAL FEATURES

Liquid filling kit with joint Φ 40mm (5 m hose + filter D.40);Cardan L=1000mm Φ 22X54, with PVC plastic protection;Surcharge for powder mixer on filter tank;

Cardan l=1000mm, cross φ 22x54, with PVC protective plastic;

Surcharge for powder mixer on filter tank;

Hydraulic injector (mixer + injector);

Tank rinsing - a shower;

Surcharge for 4 ways mechanical pressure regulator "Basic 206" with the possibility of setting pressure in every sectin individually;

Surcharge for 5 ways mechanical pressure regulator "Basic 206" with the possibility of setting pressure in every sectin individually;

Surgacharge for electronic pressure regulator with 4 ways (electronic opening of seat valves, electronic pressure setting and electronic opening of the central valve) with battery controller 12V;

Surcharge for electronic pressure regulator with 5 ways (electronic opening of seat valves, electronic pressure setting and electronic opening of the central valve) with battery controller 12V;

Set of catadiopter triangles;

Manometer Φ 100mm;

Complete tri-jet nozzles; Air nozzles to 20 km/h type AD-IA - 02 yellow (Tecomec), reccomended pressure 2 to 7.5 bar, with accessories 110º; Air nozzles to 20 km/h type AD-IA - 03 blue (Tecomec), reccomended pressure 2 to 7.5 BAR, with accessories 110º; Air Ai Air nozzles to 20 km/h type AD-IA - 04 red (Tecomec), reccomended pressure 2 yo 7.5 BAR, with accessories 110º;

High pressure handle lance 60 cm;

Cointainer for thoroughly mixing of preparation and reception in main tank, which containes an nozzle for packing rinsing (mixer);

Light signalization;

mandano_tab_srb1